|
Post by billcs on Jun 2, 2007 20:22:08 GMT -5
I haven't recorded anything since late last year but I seem to be having a mental block!
I know that it's basically supposed to be a set up like this:
Computer out to Stereo in Stereo out to Computer in
However I have a mixing board with a splitter. So the computer goes out and into the splitter, and so do my stereo and mixing board.
There's probably an easy solution to the reverse, but I have gone black about this.
Help!!
|
|
|
Post by Drew on Jun 7, 2007 20:55:58 GMT -5
If you're recording from the stereo into the computer, All you need is Stereo Line Out to Computer Line In
With a mixer, it should be set up something like this: Stereo Line Out(s) to Mixer Input(s), and Mixer Output to Computer Line In
|
|
|
Post by billcs on Jun 10, 2007 10:16:23 GMT -5
If you're recording from the stereo into the computer, All you need is Stereo Line Out to Computer Line In With a mixer, it should be set up something like this: Stereo Line Out(s) to Mixer Input(s), and Mixer Output to Computer Line In Thanks Drew. I'll see if I can give this a try later!
|
|
|
Post by billcs on Aug 4, 2007 14:03:21 GMT -5
Finally had some time to work on this today and got it working!
|
|